If you wish to become our dealer, you just need to provide some of your information to us, i.e., the name of your registered shop along with the complete address, your details, contact numbers, pancard details(not mandatory). Afterwhich we get all the information registered with us. Once it's recorded in our system, we forward it to our relevant department, and then you get a revert from them as per the requirement in your area.

We're sorry for the inconvenience caused to you. We completely understand your situation. However, once there's a requirement in your area, we would accordingly revert and notify you regarding the same .

We cannot provide you the information for the entire investment for dealership, as it differs from area to area. Once registered for dealership, our relevant department reverts and provides the information.

Dealership can only be provided if the registered shop is in your name. If in case the shop is registered under your sibling's or relative's name, you can get our dealership registered under their name.

To avail our dealership, you need to have a registered shop under your name.

Yes, you can. You would need to email us on customercare@asianpaints.com, along with your pincode and address. We will revert to you with the terms and conditions for dealership in the next 24hours.

We're sorry, we are not authorised to provide that information. However, we can help you get a dealership. You just need to provide some of your information i.e., the name of your registered shop along with the complete address, your name, contact numbers, pancard details(not mandatory). Afterwhich, we register this information with us. Once it's recorded in our system, we then forward it to our relevant department, and then you get a revert from them as per the requirement in your area.

If a customer calls to inform that he/she hasn't received the booklets yet, first you would need to check the date on which the booklets were registered. If the date exceeds more than three months, then you need to re-register for the booklets and inform the customer accordingly. And in case it has not exceeded a month, then you will need to check for dispatch details, locate POD number and provide it to the customer. We request you to check with Blue Dart Courier Services/Speed Post.

We request you to approach our nearest dealer for further enquiries.

Sure, please provide your email ID. We will forward your request, and you will receive an Easy Colour Beautiful Home Guide, via email within the next 24 hours.

If you haven't opened the lid of our product, it will last for 3 years from the date of manufacturing. However, if you have opened the lid of the product tin, then we recommend you use the product within the next 24 hours.

In order to verify if the Product is our original product, you need to check some details on the product Tin: 1) First you need to check if our Logo (Ribbons) is mentioned on the Product Tin. 2) You need to check the spelling of Asian Paints, and also the name of the product mentioned on the tin. 3) The Helpline number is 1800-209-5678, and you can call anytime between 08:00 am to 08:00 pm, Monday to Sunday. The address to our headoffice is: Asian Paints Ltd, Asian Paints House, 6A, Shantinagar, Santacruz (E), Mumbai - 400055. Our telephone number (022-39818000) should be mentioned on the Product Tin.

Yes, we do provide one. However, we require certain details from you i.e.: 1) Product Name. 2) Shade Name. 3) Shade Code. 4) Base Name. 5) Base Code. 6) Batch No. 7) Quantity. 8) Manufacturing Date. 9) Where it is used (Surface)? 10) What are usage & application conditions, and specification if any. 11) Project for which it is required. 12) Interior or Exterior Exterior surface. You need to email all the above information, at customercare@asianpaints.com and we will revert to you in the next 24 hours.

Yes, we do provide that service. Asian Paints Home Solutions would do that for you. We can share your contact details with them, and they will get back to you.

Utsav Synthetic Distemper can be applied after sanding off the earlier Chuna substrate. This should not result in chalking.

Yes. Intermediate coating implies that you need to apply either Apex or Apex Ultima, in the shade of your choice, above Apex Duracast Roughtex.

Yes, SmartCare Crack Seal can be used for cracks upto 3mm width. But, in case the cracks are wider than 3mm, the use of Crack Seal is not advised. Also, if it is a continuous leakage, we advise the treatment to plug the source before any waterproofing products are applied. Crack Seal will only give a short relief in this case.

It is not advisable to apply Primer, and leave it for a long period of time (not more than 10-12 days). If it is applied and kept for a long time, then it will form a powder and lead into loss of adhesion to paint the film. Therefore, it is recommended to cover the primer with Top Coat within the shortest possible time i.e after drying of primer. In case wherein putty is applied earlier, one can apply Primer and 1 coat of Finished Paint and wait for 2 months. Post that, light sanding and finish paint (2-3 coats) can be applied.

One can apply additional coats after 15-20 days, but surface needs to be sanded properly with sand paper 320. However, additional coats may not give a deeper shade. Probably, one need to use darker shade for the same.

SmartCare Damp Block can be applied. However, the surface condition is very important before applying Dampblock, and also, the source of the leakage. In case the plaster is loose, one needs to re-plaster the surface, and then Dampblock can be applied covering the extra area (atleast 1 feet) from all sides. However, in case there is a bathroom attached, leakage from a pipe or the drainage system needs to be fixed, or it will accelerate the problem further.

Thank you for your suggestion and enthusiasm to help us better our products, and address consumers needs. In fact, this is an idea we have been evaluating for some time now, and we would definitely bring it out to the market when we have the right product with us. The only drawback here is that with time, insects or living organisms become immune to such anti-insect additives and develop a resistance to the product. To make this claim in the product, we would have to be very sure of its performance. We are working on it and many other innovations as of now. Once again, it is great to see such enthusiasm from consumers such as you. This motivates us to bring out the best in front of our customers.

Ideally, the old paint is to be scraped off, and then a coat of Exterior primer is to be applied before application of Apex. If Primer is not applied, and the earlier paint was a cement paint, chances are paint peeling off are on a higher side.

Yes, spraying instead of rolling will definitely give better finish, however mist formation in air and skill required to spray the paint is very critical. One needs to take care of covering/masking, choosing right spraying equipment and skilled applicator for chieving right finish.

We don't have any process to dispose the used container. Typically, it is given to the Plastic garbage collector, who in turn sells it to a plastic recycle agency.

You can calculate the quantity of paint required with the following: Total litres of paint required = Total Surface area (in square feet) X Number of coats / Coverage of paint (square feet per litre).

One can use Exterior Sealer or Primero for the same followed by any water-based Topcoat. However, one needs to check adhesion of the same on gypsum tiles post application.

One can use both Enamel-based or Water-based paints. In Solvent-based paints, one can use Premium Satin Enamel. In Water-based paints, one can use any of the following - Royale/Royale Shyne/Premium Semi Gloss Enamel.