search-button

TRENDING

Terrace waterproofing

Exterior Waterproofing

Preparation for Exterior & Terrace waterproofing

Every home demands powerful protection against silent invaders—seepage, cracks, and leakage. These are general problems that your terraces and exterior house walls may face, and these issues requires thoughtful preparation and effective tools and products.

Products like Damp Proof and Damp Sheath Exterior offer essential waterproofing solutions to address these challenges, but the real magic begins with proper surface preparation. Below is a step-by-step guide on how to get the job done right.

Terrace Woes: Why Does Leakage Occur?

Terraces usually face the most of nature’s fury—unwavering heat, massive rains, and periodic wear and tear. Over time, multiple aspects conspire to make terraces prone to leakage:

 

  • • Cracks:

  • Intense heat causes the surface to expand and contract, leading to cracks.

     

  • • Improper Materials:

  • Using standard coatings and chemicals without waterproofing the terrace layers might affect its longevity.

     

  • • Abrasion:

  • Massive rainfall, combined with regular exposure to other harsh weather elements, wears down the surface.

     

When the terrace becomes a sieve rather than a shield, it is evident that comprehensive waterproofing is overdue.

 

Exterior Walls and Their Hidden Enemies

Determining the root cause of any issue is essential, as superficial solution only provide a short-term relief. Mentioned hereunder are common culprits behind wall dampness:

 

  • • Open Drain Outlets:

  • Water from drain pipes spilling onto walls is a recipe for disaster.

     

  • • De-bonding of Plaster: 

  • Poorly plastered walls often get damaged by rainwater, leading to chunks falling off.

     

  • • Gardening Hazards:

  • Planting too close to walls can lead to seepage, as roots and water find their way into vulnerable areas.

     

These issues emphasize the need for a thorough investigation and proactive treatment before applying any product.

 

Step-by-Step Guide to Surface Preparation

Before proceeding to advanced solutions like Damp Proof or Damp Sheath, the groundwork must be laid carefully. Surface preparation isn’t just about cleaning—it’s about ensuring a solid base that will hold the protective layers.

 

1. Curing New Masonry

New masonry should be cured for a minimum of 28 days to achieve its full strength. Skipping this step can compromise the surface's durability.

 

2. Ensuring Proper Slope

Terraces must have a positive slope and a functional drainage system to prevent water ponding, which accelerates damage.

 

3. Checking Soundness

A small hammer can help determine vulnerable spots in the substrate. Any hollow sounds indicate spots that require immediate attention.

 

4. Cleaning the Surface

Dust, grease, and loose paint must be removed using wire brushing, high-speed water jets, or vacuum cleaning. These methods ensure a pristine surface, ready for treatment.

 

5. Repairing Cracks and Joints

Corner joints, channels, and parapets often hide small cracks. These must be sealed with high-quality products like the Asian Paints Smart Care Crack Seal.

 

Priming the Exterior Walls

Exterior walls protect the home and enhance its aesthetic appeal. Choosing the right exterior house colors isn’t just about style; it’s about durability, too.

 

Crack Filling

 

Hollow Areas

Any hollow patches on the wall should be repaired before applying the Damp Proof Range. This ensures the waterproofing paints adhere properly and perform effectively.

 

Special Attention for Terrace Waterproofing

Terraces demand a higher degree of care due to their exposure to diverse weather conditions. Once the surface is prepped, apply the right products, like tiles adhesive, which seal the deal—literally.

 

Steps for Terraces

  1. After ensuring the slope and drainage are in place, repair all visible cracks. Cracks up to 3mm can be filled with Asian Paints Smart Care Crack Seal whereas cracks up to 10 mm require Asian Paints Smart Care Textured Crack Filler. 
  2. At joints, corners, and vertical surfaces, use Asian Paints Smart Care Joint Tapes for added protection.

 

Choosing the Right Products

The market is flooded with options, but not all products are created equal. For the best results, a combination of effective tools and reliable brands like Asian Paints Smart Care is crucial. Here’s how each product contributes:

  • • Damp Proof Xtreme: 

  • A high-performance terrace waterproofing solution that provides superior protection against heavy rain and dampness.

     

  • • Damp Sheath Exterior: 

  • A durable waterproof coating designed to shield exterior walls from rain.

     

  • • SmartCare Crack Seal: 

  • Designed for minor cracks, this wall crack repair solution ensures the cracks don’t widen over time.

     

  • • SmartCare Textured Crack Filler: 

  •  A heavyweight for larger cracks, this crack seal product provides a smooth surface for further layers.

 

Final Touches

Waterproofing is not just a process—it’s a promise of protection, style, and peace of mind.  Protect homes with the trusted expertise of Asian Paints Waterproofing Services.

From terraces to exterior walls, Asian Paints offers cutting-edge products and services tailored to keep spaces leak-free and long-lasting. Call trusted experts today and enjoy peace of mind with every drop of rain! Asian Paints—because every home deserves the best.

LIKE THIS ARTICLE

Give us a thumbs up!

Image

TEXTURE FINISH

Royale Play special effects for the interior

Need help with your painting needs?

Fill the form below to book an appointment with an in house interior designer. 

By proceeding, you are authorizing Asian Paints and its suggested contractors to get in touch with you through calls, sms, or e-mail

By proceeding, you are authorizing Asian Paints and its suggested contractors to get in touch with you through calls, sms, or e-mail

Our Divisions